Keurig coffee makers have transformed the way we make coffee in the home as well as at the workplace. If it weren’t for the single-use coffee machines it would be impossible to make coffee without putting in an empty pod filled with ground coffee. This also means that you can make just enough coffee to satisfy one cup instead of throwing an entire carafe of it in the garbage.
However, these extras won’t lift you free of cleaning up. Keurigs still require care to run efficiently and to give you great tasting coffee. In this blog, I am going to tell you how to clean Keurig needles step by step. So, let’s get started!
KEURIG TOOL LOST! I DON’T KNOW WHAT TO DO NOW
Don’t fret! If you’ve lost or lost the device included with the Keurig it is still possible to cleanse the needle that is in the entry and the exit needle. All you require is a toothpick or paper clip.
The signs that you should get rid of the needle are your cup of coffee not being half full, and the water starting to leak out of the machine. The Keurig could also begin slowing down or sputtering. In certain instances you might notice small coffee beans spilling into the cup or onto the counter.
All of these indicators indicate a blocked needle! If the needle is blocked the water cannot flow through the cup to make your morning cup of coffee. To prevent or repair this issue, make sure you cleanse your Keurig K-cup’s needle every month. Let’s go through the steps needed to clear the Keurig needle of dirt without using a needle cleaner.
HOW TO CLEAN KEURIG NEEDLES?
- The first thing to do is unplug the Keurig coffee maker. You aren’t looking to shock and hurt yourself.
- Then, take the K-cup cup holder from the coffee maker. To reach the pod holders, lift the handle, grasp it at its top then use the hand to push it onto the holder at the bottom. If you’re unsure the location of the pod holder the place you put the coffee pod in order for making coffee.
- After you’ve taken the pod holder removed and you’re ready to remove it, you’ll need to break it down to get rid of the funnel. The funnel is situated at the lower part of the holder and if you hold both ends, you’ll be able to release the funnel. If the connection isn’t secure enough it is possible to place the holder in hot water.
- Then, grab your toothpick or paperclip. Put it in the tube that is located on the lower part of the pod holder. In order to accomplish this it’s necessary to straighten the paper clip , then flip the container upside down.
- You’ll need to move the toothpick or clip around to get rid of any coffee grounds or particles. Be careful not to push the clip or the toothpick throughout the tube. It is not necessary to press too hard, as you may damage the needle.
- After you’ve cleared the clogs, run your funnel and the holder of the pod under clean water. After washing them and wiping them clean, dry them off using a soft cloth. Keep an eye on the needle and avoid contact with your skin during this procedure.
- If you do not want to wash by hand and dry the funnel and the holder for the pod the funnel, place them on highest racks of the dishwasher. Make sure you use the air-dry option in your dishwasher.
- Alongside the needle inside the pod holders, you can also find another underneath the head of the brew. It’s visible under the machine’s top when you pull the handle up.
- You’ll need to make use of your toothpick or paperclip to gently remove the dirt and debris stuck onto the needle. It’s necessary to do this for both needles, but not with excessive force. Be aware that contact could cause injuries.
- When the pod holder and funnel have dried then snap them back into place. There will be a distinct click.
- Place the pod holder back inside the Keurig and align the two tabs at the bottom and the one tab on top. It should be possible to insert it and feel the click.
- In the end, you’ll need to go by two different brewing processes with fresh water. Fill the tank with water and then plug into it, and then place the container on top to hold the liquid. Make sure to use the largest coffee cup size in these cycles.
- Once your second cycle of rinse has completed then you are able to use your Keurig to prepare your morning coffee!
SHOULD I CLEAN OTHER PARTS?
To ensure that your Keurig in top shape It is also important to clean out your water filters. In general, you’ll have to change it out at least every 2 months. However, if you’re truly into making coffee and would like to take a proactive approach then you might need to replace the filter more frequently.
A part of the coffee maker maintenance schedule, it is recommended to be planning on cleaning your Keurig K-cup every often. Descaling is a way to remove deposits of hard water and other minerals that accumulate. To remove the scale from your Keurig it is possible to purchase commercial cleaning products or create an at-home descaling solution with water and vinegar.
Conclusion
Cleaning your Keurig needle is a must take care of if you want to ensure that Keurig continues running. If you don’t clean it properly you’ll see a decrease on the efficiency of your Keurig. The worst part is the coffee you drink aren’t as delicious.
Keep in mind that you don’t require an additional tool to maintain your Keurig needle free of debris. By using the paperclip method all you require is a straightened-out , straight paperclip or toothpick to get rid of coffee grounds and other debris. Once you’ve got the process down, it’s not that difficult to complete the whole procedure.
Hopefully, after reading this blog, you are now clear with all the methods of how to clean keurig needles. Please use these methods and share your experiences in the comment section. Thank you!