How To Clean Timberland Boot

How To Clean Timberland Boots | Step By Step

Boots from Timberland are among the most recognizable and make excellent additions to any shoe collection. A new Timberland owner may find it intimidating to take on the responsibility that comes with such an investment, but if you know how to properly care for your boots, you’ll be able to enjoy them for many years to come.

Though the basic Timberland boot is made of nubuck leather, Timberland boots are often available in suede and leather variations. Along the way, I’ll lead you through the step by step method of how to clean timberland boots and offer plenty of advice on how to take care of the various kinds of leather and suede.

How To Clean Timberland Boots?

Timberlands are really simple to clean. Simply clearing away any extra dirt, wiping clean, spraying on protection agents, and brushing your boots will keep them looking brand new and extend their lifespan.


  • Waterproofing spray (specific to the suede or leather of your boots)
  • Boot brush, suede brush, or a towel that’s a little rough
  • shoes wipes (or a warm washcloth)
  • Sprays or solutions for cleaning the fabric of your boots (Timberland sell official ones)
  • a toothbrush and mild dishwashing liquid

Now Follow These Steps

First, take off the laces.

By doing this, you can thoroughly deep-clean the entire boot without worrying about your laces becoming tangled up in the cleaning solution or getting in the way.


To gently remove any loose dirt or debris from the surface of your boots, use a boot brush. You might wish to perform this crucial step twice for each boot to ensure that all the dust particles are removed.

Step 3: Clean your shoes.

To remove any dirt that was left over after brushing your boots, gently wipe the entire exterior surface with shoe wipes or a warm, slightly damp towel.

Apply boot cleaner in step four.

Bring your boot cleaning liquid or spray. For your particular boot kind, you should have the appropriate cleaning. If your boots are made of suede or nubuck leather, you may treat both materials with the same cleaner; just opt for one that is designated for suede and nubuck.

You must search for specialized leather-treating cleaning products if your boots are composed of waxed, oiled, or pebbled leather. If in doubt, always double-check the care instructions on the Timberland website before cleaning your boots with any liquids.

You can begin cleaning your Timberland shoes as soon as you have the right cleaning solution. Simply apply a tiny amount with a sponge or the specific applicator that came with your product while placing one hand inside your boot. 

Check the label of your cleaning product for the application instructions. In order to avoid mistakenly reshaping the softer areas of your boot structure during the cleaning process, you must apply pressure to the interior of your boot that is opposite to the pressure you are applying to the outside of your boot.

5th step: Wash the shoes.

You could wish to skip this step if your Timberlands are only moderately soiled. However, it’s worth giving the soles of your Timberlands a good wash as well if your boots are very dirty or if you’re performing a thorough deep clean. 

Simply use a toothbrush and warm water with a drop of mild dishwashing liquid to scrub the soles, making sure to get the brush head into all the crevices in the boot tread. If required, rinse again with warm water to get rid of all of the filth.

6th step: RINSE

Clean the upper portion of your boots by briefly running them under clean, running water to remove any lingering dirt and cleaner residue. Just give yourself a brief rinse; don’t go overboard.


Prior to drying your boots, you must ensure that they will maintain their shape. To keep the exterior construction firmly in place, stuff the interiors with scrunched-up newspaper, paying special attention to the toe area. 

After that, leave your boots to dry naturally for at least 24 hours—or longer if necessary—in a warm area. Avoid the temptation to position your boots next to heat sources like radiators or fireplaces, and avoid using hair dryers or other heating devices on them because doing so can cause the suede, nubuck, or leather to crack or become damaged.


You could discover that your boots still don’t seem quite right after they have dried entirely. This is due to the fact that the soft suede or nubuck is probably still little matted after the cleaning procedure, but it’s nothing to worry about because the buffing stage will take care of it. 

Gently brush the surface of your Timberlands in a single direction with a clean, dry suede brush. By doing this, you can assist the suede fibers lie straight once again and restore the appearance of your boots to normal.

Step 9: Waterproof and seal your boots

As directed on the box, spray and seal your boots with the waterproofing solution. Normally, you must put these substances to a soft, clean cloth and gently wipe the boot with it, being careful to move in the same direction you did while buffing. 

Similar to the cleaning solution, waterproofing treatments are available to match the unique fabric of your boots. Usually, you can use the same product on both suede and nubuck Timberlands, but be sure to double-check this first!

The Bottom Line

I told you it would be simple to clean Timberlands, see? Depending on how frequently you wear your boots, I would advise you to adhere to these easy measures as often as you can to prevent them from becoming overly “worn.” 

After all, doing little and frequently is preferable to having to spend hours attempting to undo months’ worth of harm. And now that you know how to clean Timberland boots properly, you can maintain your boots in pristine condition for years to come.