Although a fresh white wall is lovely, it can be ruined by scuffs, marks, and, uh, keen artists in the family. Naturally, cleaning them down is your go-to remedy, but alas, this doesn’t always solve the issue.
Meanwhile, redecorating is a completely different kettle of fish that you should avoid unless absolutely necessary because it involves a lot more work and incurs additional costs. But are there any other approaches you may use instead of pulling out a paintbrush to restore the cleanliness to your walls?
In this blog, we’ll talk about how to clean white walls in detail. So, let’s get started!
How Often Should White Walls Be Cleaned?
White walls normally need to be thoroughly cleaned every six months or so because that is when they begin to noticeably gather dirt and debris. You might want to clean your white walls more frequently if you have children or pets that make a mess. Even still, it’s possible that most homeowners don’t clean their walls as frequently as you might imagine.
“Wall cleaning used to be something that every decent homeowner or cleaning service took on twice a year, but now it’s something that is not done nearly as often as it should be, if you employ a cleaning service, they will probably charge you an additional fee to clean the walls.
Typical indications that white walls require cleaning include:
- apparent dust on the walls
- Marks on the walls
- mud on the walls
- In the corners where the walls and ceiling meet, there are spiderwebs.
You need not wait for a biannual clean or for any of these symptoms to appear.
What You Will Need?
You’ll require the following tools to thoroughly clean your white walls:
- a duster or the dust-brush attachment for your vacuum
- Wet mop (optional)
- a microfiber cloth (optional)
- a magic wand (optional)
- sponge that won’t scratch
- dishwashing liquid mild soap
- Bucket
- hot water
How to Clean White Walls?
Your white walls probably took some time to become dirty, thus it will take some time to thoroughly clean them. Fortunately, you won’t require any expensive equipment or cleansers to complete the task. I suggest the following step-by-step instructions for cleaning white walls.
Start With a Blank Slate
Make sure you have a clear slate before you actually begin cleaning. Anything that might be hung on the wall should be taken down and put aside. (If you want to go above and above, this is a terrific opportunity to dust those off.)
Dust From Top to Bottom.
When trying to restore your white walls to their former sparkling state, dirt isn’t your only adversary. Dust your walls completely from the ceiling down before washing. You may use any kind of duster, including a microfiber cloth, but utilizing the dust-brush attachment for your vacuum for a more thorough clean. Try using a dry-mop head wrapped in a soft, clean cloth instead of one without a duster attachment.
Dust the whole surface of the wall with your selected tool, being cautious not to scratch it with the mop or vacuum’s stiff parts.
Create Your Cleaning Solution
Get a bucket and fill it with a gallon of warm (not hot) water for the exciting portion. Including a dab of mild dish soap. Not as much as you anticipate. Less soap is really preferable because it will make it easier for you to properly rinse it out once you’re done. “Left-over soapy residue on a wall eventually attracts grime.”
Spot Check
Test your soap solution on a discrete, tiny section of your wall before using it to prevent inadvertent harm to your walls or paint job. Washing a portion of the wall that is typically concealed by your couch or a picture to make sure your soap and water solution won’t harm the color or gloss of the paint.
Varela advises delaying the test for a few hours so you can see whether the paint has been harmed. According to him, flat and eggshell paint are more vulnerable to stains and discoloration.
Clean the Walls
To avoid watermarks and paint bubbling, soak a cloth or sponge in the liquid and wring it out well so it’s moist but not soaked.
Next, use circular strokes to lightly wash areas of your walls. It is preferable to start at the top of the wall and clean your way down because water will leak as you clean.
Do Detail Work
Use your sponge to scrub the actual walls thoroughly before moving on to the baseboards and trim. Melamine foam, sometimes referred to as a Magic Eraser, can be used if you still see stains or grime on any section of your wall.
To treat the problematic areas, just wet the foam, squeeze off the extra water, and rub gently. Don’t go overboard because the foam’s abrasiveness could harm the finish on your wall.
The Bottom Line
I hope after reading this blog, you are now aware of the best method of how to clean white walls. Please use the above method and share your experiences in the comment section. Thank You!