how to clean woodwork

How To Clean Woodwork | Complete Cleaning Method

Woodwork that is classic never goes out of fashion and is frequently featured in vintage, farmhouse, and mid-century modern designs as family heirlooms or the occasional flea market find. But, furniture made of wood can be difficult to keep clean. In time, it will begin to show dirt or grime that isn’t easily removed using the help of a duster. Even cleaning the furniture with a duster, shiny spots of dust are left on the furniture.

When you think about Woodwork maintenance there are a variety of terms that are discussed, such as cleaning, dusting, waxing and polishing. Experts may have different opinions regarding how to clean woodwork. So, how you do it will be based on the finish of the furniture. It is important to research specific cleaning and care guidelines when buying new or used furniture. Continue reading to find out how to clean woodwork. So, lets begin!

How to Dust Woodwork?

To keep furniture made of wood in good condition Keep it clean by regularly dusting. Dust can create airborne particles that can eventually accumulate into the form of a film and then scratch the wooden furniture. The accumulation of dust on your furniture could trigger allergies or cause harm to asthma sufferers. Most dust lives in the fabric therefore, it is important to clean upholstery or carpets as well.

To clean furniture properly collect and remove dust instead of spreading it over the surface. To prevent scattering dust to the sky, in which case it will drift until it lands on the furniture’s surface, extremely delicately dampen a microfiber fabric before wiping it down. Get rid of any moisture using dry terry cloth.

How to Clean Woodwork?

Cleaning furniture made of wood should not use all-purpose sprays for cleaning like the ones that are used for kitchen tables except if your furniture is covered with the coating of plastic. You should avoid cleaning your wood using water too. However, some sticky spots might require treatment by washing with water and soap. In order to do that, soak an lint-free cloth into moderate soap or detergent that has been dissolved in water. Wring the cloth until it is dry and then clean the area. Rinse, and then dry it using a soft, clean cloth.

Cleaners, oil polishes and furniture oils help protect wood by making it more slippery. But, they don’t provide a tough protective layer. The majority of commercial sprays as well as liquid furniture polishes are made of silicone oil that can offer some protection. Be aware that products with an excessive amount of oil may leave fingerprints. If you’ve ever utilized polishes and wood sprays in the past, or believe that furniture was polished with them, you should be aware that these residues may affect refinishing work and require professional assistance.

Do not polish furniture using pure olive oil. It can cause smears and attracts dust. Instead, you can try this recipe at home for cleaning wood.

  1. To bring back the luster of your Woodwork Mix the equal amount of olive oil with denatured alcohol gum turpentine and strained lemon juice.
  2. Apply the cream with an easy cloth and then scrub with a clean, dry cloth.

How to Apply Furniture Paste Wax?

Usually during the process of manufacturing varnish, polyurethane or shellac is sprayed on wood to protect it from scratches. The application of polish or wax helps protect the finish of the manufacturer and assists in reducing scratches on the surface. Wax gives a durable finish with a long-lasting protective coating, does not smudge and is much more durable than polishes or sprays. Make use of liquid or paste wax specifically designed for furniture. Based on the use the paste wax finish can last up to two years. Liquid wax is more convenient to apply, however it creates less of a coating. It could require applying more often in comparison to paste.

It is essential to apply wax on furniture properly, or it could cause streaks or an appearance that is cloudy. For a proper application of furniture wax to bring back the shine of your furniture ensure that you apply the wax with light coats and rub into the wood with the grain.

  1. Use a spoonful of Woodwork wax roughly what the diameter of a golf ball in an inch square of 100 100% cotton fabric. The fabric should be wrapped tightly around the wax, then make it soft by kneading it.
  2. Rub the wax-saturated fabric over the furniture’s surface in small portions at each time until the surface is dull.
  3. Clean up the wax using a clean smooth cotton cloth.
  4. Repeat wiping and waxing until the whole piece of furniture is completely waxed. If you see streaks, you can wipe to get rid of any wax.
  5. Polish furniture made of wood using the help of a lamb’s-wool or soft cloth pad that is attached by an electric power drill. If the wax gets smears on it then wipe it away with a soft cloth , then continue to buff.
  6. To achieve a high shine Apply a second coat of wax using the same method.

To keep furniture that has been waxed to keep it looking fresh, dust it off with a lamb’s-wool duster. Do not use aerosol or liquid furniture polishes since they may dissolve the wax and leave the furniture with a cloudy appearance.

How to Clean Old Woodwork?

If you own an antique piece of Woodwork , or perhaps a delicate family heirloom, you’ll probably be inclined to take care of it more cautiously. This three-step maintenance and cleaning regimen is the best method to maintain your old furniture as it ages.

  1. Clean your furniture about every year using a commercial cleaning product that uses steel wool #0000. Work in the direction of the grain and be sure to follow the directions of the product.
  2. Repair as necessary, particularly against sun-induced fading, by using a commercial finish restoration product. Select a shade closest the stain that you’re working with , and apply the steel wool #0000 to one small area at one time. Work along an incline of wood using moderate to light pressure. Clean up immediately using an unlinty cheesecloth or a cloth.
  3. Make use of an oil-based or wax-based conditioner each month to stop cracks and drying.

How to Clean Mold Off Woodwork?

Start with a vacuum that has an attachment for a soft brush to remove scattered spores. Then, clean the area with a clean cloth coated with moderate soap or detergent dissolving in water. Wipe the area until it is nearly dry. Rinse, and dry immediately using a soft, clean cloth. To safeguard the finish, use furniture wax according to the instructions above.

How to Deep-Clean Woodwork?

You’ve found the perfect piece from a garage sale, but now what can you do to make it shine? For the first step in getting rid of the grime and dirt from old furniture, you can use an oil-based detergent and water. Rinse thoroughly and dry. If the surface appears dirty, scrub it using #0000 steel wool that has been dipped into a cleaning product. Certain products that have an appearance of milk are designed to remove solvent-based as well as oil-based residues. Don’t use any mixtures that contain boiling linseed oil, turpentine and white vinegars. They can cause wood to darken and draw dust and dust and. Instead, apply a clear wax.

The Bottom Line

I hope after reading this blog, you are now able to clean your woodwork. Please use the above method and share your experiences in the comment section. Thank You!